Power Supply for ULTIMARC AIMTRAK RECOIL LIGHT GUN – FULLY TESTED FOR BEST PERFORMANCE
24V 4A Power Supply
The 24V 4 Amp power supplies we sell allow the gun approximately 5 times the amount of continuous trigger pulls in the same time frame before any overheat cut-off in the gun, with much faster recovery so recoil reactivates sooner also. We highly recommend the 24V 4A power supplies we sell over any other ones available in the market. They are also within the manufacturer’s specs so your warranty will still be valid.
We have thoroughly tested many brands, voltages, etc…. THESE ARE THE BEST!!!
The 36V 3A Power Supply sold by others will cause the gun to overheat in approximately 100 continuous trigger pulls within a 5 minute window. For games where you shoot a lot this means the recoil will go out often (thermal safety activated). (The thermal overload is a safety feature built into the guns and is activated with rapid shooting)
DO NOT USE A 36V 4AMP SUPPLY (even if someone claims they tested it and it works… you cannot test the instantaneous output from a power supply when using it with the recoil solenoid… the peak power happens instantly and is much different than a continuous output)…using anything above 36V 3amp will VOID YOUR WARRANTY!
Not all power supplies on the market are the same, even if the specs are the same (voltage and amps) they do not perform the same. There are different types, qualities, and tolerance in the parts used. We have tested many different power supplies and have had the best performance and gaming experience with these.
NOTE: You will need 1 power supply for each recoil gun.
Specifications:
100% Brand new Power Supply
Input : 100V-240V 50/60Hz
Output : DC 24V 4A / 4000mA
Output adapter jack size : 5.5mm x 2.5mm-2.1mm
Adapters Connector inside positive (+) outside negative (-)
Power Supply INCLUDES USA POWER CORD
